JEFFOPTICS - GLASS STRESS METERS
AEM-01 Automatic Edge Stress Meter
Sample thickness
14 mm
Resolution
1 nm or 0.1 MPa
Calculating rate
12 Hz
Sample transmittance
4% or less
Measure length
50 mm
Calibration
Wave plate
Operation system
Windows 7/10 64bit
Measurement range
±150 MPa@4mm, ±100 MPa@6mm, ±1600 nm or customized
Standard
ASTM C 1279-13
The AEM-01 Automatic Edge Stress Meter adopts the photoelastic principle to measure the edge stress of glass according to ASTM C 1279-13. The meter applied to laminated glass, annealed glass, heat-strengthened glass, as well as other tempered glass application with non-destructive stress measurement technology. Because the process is almost entirely automated, no special operator training or skills are required.
The edge stress meter can measure the stress distribution (from compression to tension) at one time with a speed of about 12Hz and the results are accurate and stable. It can meet the requirements of rapid and comprehensive measurement and testing in factory production. With the features of small size, compact structure and easy to use, the meter is also suitable for quality control, spot check and other requirements.
For the hardware, there are a sample measurement port, a positioning block and three positioning points. The probe head is directly connected to the computer through USB2.0 interface.
For the software, AEM-01 Automatic Edge Stress Meter (short for AEM), providing all the operation functions such as setting, measurement, alarm, record, report and so on.
